GL / Gingival level


Download Catalogo JV
Download Catalogue
Untuk informasi lebih lanjut tentang komponen EL, Silahkan klik disini
Download Catalogue
Untuk informasi lebih lanjut tentang komponen GL, Silahkan klik disini
Garansi
C-TECH menawarkan garansi 10 tahun untuk semua implan dan bagian. Baca lebih banyak »
Download Catalogue
Untuk informasi lebih lanjut tentang komponen MB, Silahkan klik disini
Garansi
C-TECH menawarkan garansi 10 tahun untuk semua implan dan bagian. Baca lebih banyak »
Download Catalogue
Untuk informasi lebih lanjut tentang komponen ND, Silahkan klik disini
Garansi
C-TECH menawarkan garansi 10 tahun untuk semua implan dan bagian. Baca lebih banyak »
Download Catalogue
Untuk informasi lebih lanjut tentang komponen SD, Silahkan klik disini
Garansi
C-TECH menawarkan garansi 10 tahun untuk semua implan dan bagian. Baca lebih banyak »
Accordion EL JV
EL / Esthetic Line
Esthetic Line adalah implan berbentuk kerucut yang menawarkan kompatibilitas bedah dan prostesis dengan lini BL implan. Inti implan EL adalah sama seperti inti implan BL dan dengan demikian mengikuti protokol penyisipan yang sama dalam tulang lunak. Implan EL implan memiliki alur apikal yang baik yang memberikan stabilitas primer yang luar biasa, terutama di tulang lunak.
- Read more »
Sambungan prostesis implan EL adalah sama dengan BL, sebuah koneksi penguncian lancip Morse yang memberikan peningkatan tingkat keamanan terhadap abutment longgar, pergerakan mikro dan masalah lain yang merupakan akibat dari celah koneksi implan.
System prostesis gigi perubahan landasan, Konsep Estetik Cekung dari sistem implan EL menawarkan berbagai macam pilihan serta kemungkinan membentuk jaringan. Meskipun terdapat berbagai macam kebebasan prostesis, sistem tersebut tetap tidak rumit dan mudah digunakan karena faktanya koneksi prostesis adalah sama untuk semua diameter implan.
- 1Bevelled Shoulder / Subcrestal Seating
- Facilitates bone growth above the shoulder
- Long term implant stability
- Biological repartition of the forces in cortical bone - 2Micro Grooved / Threaded Collar
- Softens forces to the cortical bone during insertion
- Cortical bone maintenance - 3Surface Topography
- Best surface for osseointegration and bone to implant contact
- 4Aggressive Apical Design
- Ideal for immediate implant placement
- Primary stability - 5Rounded Apex
- Protection of the sinus floor, nerve canal and other important anatomical structures during insertion
- 6Double Lead Thread
- Insertion rate of 1.5mm per rotation
- Primary stability
- Increased bone to implant contact
- Faster and even insertion while protecting bone structure - 7Thread in Thread / Groove in Groove
- Increased bone to implant contact
- 8Concave Esthetics
- Non surgical thickening of the peri-implantary tissue
- Facilitation of the papilla reconstruction-technique - 9Platform Switching Implant
- Reduces bone loss
- Better representation of the biological width
- Long term esthetic stability - 10One connection for all 5 diameters
- Simplifies the system
- Reduces inventory
- Ease of use - 11Cold Weld Seal
- Prevents bacterial infiltration of the implant/prosthetic connection and consequent bone loss
- 12Morse Taper Locking Connecton
- Elimination of micro-movements
- Elimination of screw loosenings - 13Indexing hex
- Antirotational security
- Bevelled Shoulder / Subcrestal Seating
- Hinders exposure of the implant through bone resorption
- Ideal for the esthetic zone
- Long term esthetic stability - Menguangi of the micro gap
- The Morse locking tapered connection is shown to leave a gap which is smaller than 1 micron
- 3 Different Threading Profiles
- Thread designs adapted to different bone structures that occur along the lenght of the implant
- Enhanced surface area
- Round but cutting apex design - Bibliografi dan Kepustakaan
- Bibliografi
- Kepustakaan
ND / Narrow Diameter Implant
Implan gigi Narrow Diameter adalah implan dua buah bertubuh ramping dengan diameter landasan hanya 3mm. Implan ini sangat ideal untuk ruang puncak terbatas dan sempit di daerah anterior. Dilengkapi alur yang baik pada tubuh implan, yang berpuncak pada alur tajam di puncak yang memberikan stabilitas serta kemudahan penyisipan.
- Read more »
Protokol bedah sederhana dikombinasikan dengan dimensi konservatif implan gigi ini memfasilitasi penyelesaian kasus implan gigi yang akan memerlukan pembesaran tulang yang digunakan dan biaya perawatan yang lebih tinggi.
- 1Bevelled shoulder
- Facilitates bone growth above the shoulder.
- Long term implant stability.
- Biological repartition of the forces in cortical bone. - 2Micro grooving
- Softens forces to the cortical bone during insertion .
- Cortical bone maintenance. - 3
Grit blasted and
acid etched surface topography- Best surface for osseo integration and bone to implant contact.
- 4Aggressive apical design
- Ideal for immediate implant placement.
- Primary stability. - 5Rounded apex
- Protection of the sinus floor, nerve canal and other important anatomical structures during insertion.
- 6Double lead thread
- Insertion rate of 1,5mm per rotation.
- Primary stability
- Increased bone to implant contact
- Faster and even insertion while protecting bone structure - 7Thread in thread / groove in groove
- Increased bone to implant contact
- 8Platform switching
- Reduces bone loss
- Better representation of the biological width
- Long term esthetic stability - 9Indexing hex
- Antirotational security
- 10Concave esthetic concept
- Non surgical thickening of the peri-implantary tissue
- Facilitation of the papilla reconstruction-technique - 11Conical connection (cono-morse)
- Elimination of micro-movements
- Elimination of screw loosenings - Implant subcrestal seating
- Hinders exposure of the implant through bone resorption
- Ideal for the esthetic zone
- Long term esthetic stability - Three different threading profiles
- Thread designs adapted to different bone structures that occur along the depth of the implant
- Enhanced surface
- Round but cutting apex design
GL / Livello Gengivale
Implan gigi Gingival Level adalah implan berbentuk kerucut dengan koneksi heks internal. Implan ini memiliki kerah beralur mikro untuk pemeliharaan kortikal dan dimahkotai dengan rim poles untuk mengakomodasi jaringan lunak.
- Read more »
Implan gigi ini memperoleh manfaat dari landasan heks internal yang cembung yang memberikan segel ideal ketika digabungkan ke batasan GL yang pada gilirannya memiliki landasan berbentuk cekung. Implan kisaran GL memiliki dimensi platform yang sama meskipun berbeda diameter dan dengan demikian memungkinkan untuk protokol prostesis sederhana.
- 1Convex platform
The convex implant platform, in conjunction with the concavity of the implant’s base form a “suction cup” fit, once the abutment is tightened into final seating.
- 2Polished gingival collar
Extending down for one millimeter down from the top of the implant platform, the polished surface is ideal for accommodating the gingival tissue.
- 3Micro-threading
The micro threads increase functional surfaces, adapting them to the compact cortical bone tissue and safeguard it against aggression from larger threads to be found in conventional implants. The micro-threads are essential to the maintenance of cortical bone height around the implant.
- 4Single internal hex connection
The complete GL family is endowed with a single connection. Independent of the implant diameter, one abutment fits all. Thus reducing system complexity and cost.
- 5Double helix threading
The double-helix design sets c-tech Implants apart from the single helix implants by giving them a more symmetrical introduction into the bone. This translates into masticatory load balance which drastically reduces stress. Its symmetry also renders the implant self-centering, eliminating any form of misalignment in terms of the main axis of the osteotomy site. The pitch of the threads allows for an insertion time that is reduced by half.
- 6Rounded apex
Protection of the sinus floor, nerve canal and other important anatomical structures during insertion
- Passivated surface
The implant surface is blasted with aluminum oxide and then subjected to progressive etching using citric acid.
This surface treatment accelerates the osseointegration process by providing a greater and more uniform area of contact between bone and implant while favoring an immediate implant load. The treatment provides for a uniform surface with progressive trabeculation to be achieved. An additional advantage of the citric acid treatment is that it leaves no traces following decontamination, further reducing the risk of implant failure.
MB / Monoblock
Mono Blok adalah satu implan dengan diameter 3mm. Sistem ini menawarkan 2 pilihan prostesis, O-ball head untuk prosthesis penuh yang dapat dilepas serta abutment runcing untuk aplikasi Crown dan Bridge.
- Read more »
Untuk lebih mengakomodasi persyaratan jaringan dan tulang lunak yang berbeda-beda yang ditemui di rahang atas dan bawah, sistem ini memiliki dengan 2 profil tubuh utama.
- 1Prosthetic Options
Choice between square or O-ball head depending on fixed or removable applications.
- 2Support for Fixed Recontructions
A tapered head with a 4,8mm height above the 3,1mm platform offers and optimal base and structure for the fixed reconstruction.
- 3Gingival Collar
MAN-OB/MAN-TAP smooth collar provides the platform switching height to accommodate the average mandibular gingival tissue.
- 4Mandibular Cortical Maintenance
Augmented MAN-OB/MAN-TAP micro grooving for the increased cortical height of the mandibular bone.
- 5Low Profile Threading
Low profile threading offers surface area yet with the reduced resistance necessary for placement in the D1/D2 bone that can be encountered in the mandible.
- 6Surface Topography
Blasted and acid etched main body surface.
- 7Mandibular Apex
Sharp apex to facilitate advancement in D1/D2 bone.
- 8Augmented Gingival Collar
MAX-OB/MAX-TAP smooth collar platform switching fits the thicker maxillary gingival tissue
- 9Maxilla Type Bone Micro Grooving
MAX-OB/MAX-TAP micro grooving accommodates the thinner cortical bone that is encountered in the maxilla.
- 10Aggressive Main Body Threading
MAX-OB/MAX-TAP main body threading, agressive reverse buttress threads deliver the surface area and stability required by softer maxillary bone
- 11Maxilla Type Apex
Rounded tip is ideal for the maxilla so as to prevent the possible perforation of the sinus.
- System Compatiblity
Choice of tapered and O-ball head prosthetics.
O-ball head is compatible with SD, GL, BL and EL O-ball attachments
SD / Small Diameter Implants
Sistem implan gigi Diameter Kecil adalah keluarga dari implan satu bagian dengan diameter bervariasi dari 1,8 mm, 2,1 mm, 2,4 mm dan 2,5 mm. Pilihan untuk setiap diameter adalah alur agresif, alur halus, kerah dan non – kerah, kepala bola O dan kepala persegi; menjadikan kisaran salah satu yang terbesar rentang implan gigi mini di pasaran.
- Read more »
Sistem ini sangat ideal bagi para praktisi yang mencari solusi invasif minimal untuk menstabilkan gigi palsu berlebihan, ruang terbatas dan volume tulang serta kendala biaya pengobatan.
- 1Prosthetic choice
Choice between square or o-ball head depending on fixed or removable applications.
- 2Micro grooving
The lower aspect of the implant collar is endowed with micro grooves to help maintain cortical bone.
- 3Fine threading
The fine thread SD implants are designed to facilitate the placement in hard bone.
- 4Passivated surface
The implant surface is blasted with aluminum oxide and then subjected to progressive etching using citric acid. This surface treatment accelerates the osteointegration process by providing a greater and more uniform area of contact between bone and implant while favoring an immediate implant load.
- 5Smooth collar
The top aspect of every collared implant is smooth so as to better accommodate soft tissue.
- 6Aggressive threading
The aggressive thread for SD Implants are designed for the added compression and surface area required in soft bone placement.
- 7Collared and non-collared models
C-tech provides SD models with and without gingival collars, allowing the practitioner to better address cases with differing gingival thicknesses.
- Implant body
The anatomically shaped implants are produced from medical grade 5 titanium.
- Read more »
Implan gigi
Tinggi 8 mm
ø 3.5/8 mm | CT-3508 |
ø 4.3/8 mm | CT-4308 |
ø 5,1/8 mm | CT-5108 |
Tinggi 9 mm
ø 3.5/9 mm | CT-3509 |
ø 4.3/9 mm | CT-4309 |
ø 5,1/9 mm | CT-5109 |
Tinggi 11 mm
ø 3.5/11 mm | CT-3511 |
ø 4.3/11 mm | CT-4311 |
ø 5,1/11 mm | CT-5111 |
Tinggi 13 mm
ø 3.5/13 mm | CT-3513 |
ø 4.3/13 mm | CT-4313 |
ø 5,1/13 mm | CT-5113 |
Tinggi 15 mm
ø 3.5/15 mm | CT-3515 |
ø 4.3/15 mm | CT-4315 |
ø 5,1/15 mm | CT-5115 |
* Semua model GL Gingival Level disertakan dengan topi sekrup.
Scientific Publications
EL Clinical Study • February 2015 How to combine bone stability and aesthetic benefits through innovative implant design Treatment of a 65-year-old patient Henriette Lerner HL DENTCLINIC, Dentist, Baden-Baden, Germany We present a clinical case with extensive aesthetic requirements, illustrating the treatment of a 65-year-old patient with a partial edentular situation with allRead moreEL Clinical Study - September 2014 - Innovative dental implant design shows improved success rate, bone stability and esthetic benefits
EL Clinical Study • September 2014 Innovative dental implant design shows improved success rate, bone stability and esthetic benefits A retrospective study over 3 years including 2-year follow-up Henriette Lerner, DMD Director of HL Dentclinic (private practice focussed on implantology) The aim of this research is to retrospectively evaluate an innovative implant and prostheticalRead more(BDIZ EDI) Implant-Study 2014/2015 - March 2015 - Quantitative and qualitative element-analysis of implant-surface by SEM and EDX
(BDIZ EDI) Implant-Study 2014/2015 • March 2015 Quantitative and qualitative element-analysis of implant-surface by SEM and EDX Prof. Dr. Dr. Joachim E. Zöller Interdisciplinary Polyclinic for Oral Surgery and Implantology Dept. for Cranio Maxillofacial and Plastic Surgery, Dr. med. dent. Dirk U. Duddeck Head of Surface Analyses, In cooperation with the EuropeanRead moreEL Clinical Study - April 2015 - Bone stability and aesthetics using an innovative implant design
EL Clinical Study • April 2015 Bone stability and aesthetics using an innovative implant design Treatment of a 65-year-old patient by DR HENRIETTE LERNER (HL DENTCLINIC), BADEN-BADEN, GERMANY Implant success today consists of more than just “osseointegration accomplished”. We also have to take into account the aesthetic result. The present clinical case withRead moreInnovatives Dental-Implantat-Design - May 2015 - Improved Success Rate, Bone Stability, Esthetic Advantages
Magazine PIP - Issue:2/2015 • May 2015 Improved Success Rate, Bone Stability, Esthetic Advantages Author: Dr Henriette Lerner HL DENTCLINIC Abstract Implant success nowadays means more than just the achievement of osseointegration. We must also take into account the esthetic results. The present case study shows the treatment of a partially edentulous 65-year-old femaleRead more