EL美学修复植体

EL-Esthetic Line,dental implants,dentures
EL-Esthetic Line,dental implants,dentures

  • Accordion EL CH

    EL / Esthetic Line

    EL-Esthetic Line,dental implants,denturesEL与BL系统均为锥形植体设计,杰出的螺纹设计可以让植体在骨质比较疏松的种植区域取得理想的初始稳定性。

    • Read more »

      修复配件提供多种选择以满足医生的临床要求。包括粘接固位基台,螺丝固位基台,临时基台,氧化锆基台,球基台,锚式基台以及杆卡固位配件等。

      三种直径植体的内部结构和参数保持一致,这样临床的修复更加简单,清晰。避免了因为配件过多给种植医生带来的混乱和不便。

    窄直径植体

    ND Line,dental implants,denturesND植体为冠端直径3mm的两段式植体。尤其适合前牙区骨量不足的病例。 体部宽螺纹,冠端密螺纹以及根端的切割边缘设计让植体植入更容易。

    • Read more »

      简单的外科操作以及多种直径设计,可以让部分需要骨增量手术的病例更加简单,同时减少了患者的费用负担

    软组织水平植体

    GL Line,dental implants,denturesGL为锥形设计的内连接型植体系统。冠端光滑颈圈的设计有利于软组织的附着。 植体内部统一的内六角形状和参数,让上部修复更加简单。

    • Read more »

      植体冠端六角部分凸面设计,相应基台部分为凹面设计,连接部分形成理想的密封层。
      四种直径植体一种植体内部结构,让修复更加简单。

    • 1Convex platform

      The convex implant platform, in conjunction with the concavity of the implant’s base form a “suction cup” fit, once the abutment is tightened into final seating.

    • 2Polished gingival collar

      Extending down for one millimeter down from the top of the implant platform, the polished surface is ideal for accommodating the gingival tissue.

    • 3Micro-threading

      The micro threads increase functional surfaces, adapting them to the compact cortical bone tissue and safeguard it against aggression from larger threads to be found in conventional implants. The micro-threads are essential to the maintenance of cortical bone height around the implant.

    • 4Single internal hex connection

      The complete GL family is endowed with a single connection. Independent of the implant diameter, one abutment fits all. Thus reducing system complexity and cost.

    • 5Double helix threading

      The double-helix design sets c-tech Implants apart from the single helix implants by giving them a more symmetrical introduction into the bone. This translates into masticatory load balance which drastically reduces stress. Its symmetry also renders the implant self-centering, eliminating any form of misalignment in terms of the main axis of the osteotomy site. The pitch of the threads allows for an insertion time that is reduced by half.

    • 6Rounded apex

      Protection of the sinus floor, nerve canal and other important anatomical structures during insertion

    • Passivated surface

      The implant surface is blasted with aluminum oxide and then subjected to progressive etching using citric acid.
      This surface treatment accelerates the osseointegration process by providing a greater and more uniform area of contact between bone and implant while favoring an immediate implant load. The treatment provides for a uniform surface with progressive trabeculation to be achieved. An additional advantage of the citric acid treatment is that it leaves no traces following decontamination, further reducing the risk of implant failure.

    一段式植体

    MB Line,dental implants,denturesMB为直径3mm的一段式植体系统。
    提供两种修复选择。一种为球头结构的可摘式修复。另一种为锥状结构的固定修复。

    • Read more »

      MB植体两种体部设计,更好的满足上下颌区域软硬组织的种植需求

    • 1Prosthetic Options

      Choice between square or O-ball head depending on fixed or removable applications.

    • 2Support for Fixed Recontructions

      A tapered head with a 4,8mm height above the 3,1mm platform offers and optimal base and structure for the fixed reconstruction.

    • 3Gingival Collar

      MAN-OB/MAN-TAP smooth collar provides the platform switching height to accommodate the average mandibular gingival tissue.

    • 4Mandibular Cortical Maintenance

      Augmented MAN-OB/MAN-TAP micro grooving for the increased cortical height of the mandibular bone.

    • 5Low Profile Threading

      Low profile threading offers surface area yet with the reduced resistance necessary for placement in the D1/D2 bone that can be encountered in the mandible.

    • 6Surface Topography

      Blasted and acid etched main body surface.

    • 7Mandibular Apex

      Sharp apex to facilitate advancement in D1/D2 bone.

    • 8Augmented Gingival Collar

      MAX-OB/MAX-TAP smooth collar platform switching fits the thicker maxillary gingival tissue

    • 9Maxilla Type Bone Micro Grooving

      MAX-OB/MAX-TAP micro grooving accommodates the thinner cortical bone that is encountered in the maxilla.

    • 10Aggressive Main Body Threading

      MAX-OB/MAX-TAP main body threading, agressive reverse buttress threads deliver the surface area and stability required by softer maxillary bone

    • 11Maxilla Type Apex

      Rounded tip is ideal for the maxilla so as to prevent the possible perforation of the sinus.

    • System Compatiblity

      Choice of tapered and O-ball head prosthetics.
      O-ball head is compatible with SD, GL, BL and EL O-ball attachments

    小直径植体

    SD Line,dental implants,denturesSD植体为一段式植体,直径包括1.8 mm、2.1 mm、2.4 mm、2.5mm四种。每种直径的植体都包括普通型和锋利型,以及有无光滑颈圈的设计。

    • Read more »

      用来增加覆盖义齿的稳定性,同时满足骨量不足的病例以及经济承受能力不足的患者种植的需求。

    • 1Prosthetic choice

      Choice between square or o-ball head depending on fixed or removable applications.

    • 2Micro grooving

      The lower aspect of the implant collar is endowed with micro grooves to help maintain cortical bone.

    • 3Fine threading

      The fine thread SD implants are designed to facilitate the placement in hard bone.

    • 4Passivated surface

      The implant surface is blasted with aluminum oxide and then subjected to progressive etching using citric acid. This surface treatment accelerates the osteointegration process by providing a greater and more uniform area of contact between bone and implant while favoring an immediate implant load.

    • 5Smooth collar

      The top aspect of every collared implant is smooth so as to better accommodate soft tissue.

    • 6Aggressive threading

      The aggressive thread for SD Implants are designed for the added compression and surface area required in soft bone placement.

    • 7Collared and non-collared models

      C-tech provides SD models with and without gingival collars, allowing the practitioner to better address cases with differing gingival thicknesses.

    • Implant body

      The anatomically shaped implants are produced from medical grade 5 titanium.

常规植体

直径 ø 3.8
ø 3.8/8 mm EL-3508
ø 3.8/9 mm EL-3509
ø 3.8/11 mm EL-3511
ø 3.8/13 mm EL-3513
ø 3.8/15 mm EL-3515
直径 ø 4.3
ø 4.3/9 mm EL-4309
ø 4.3/11 mm EL-4311
ø 4.3/13 mm EL-4313
ø 4.3/15 mm EL-4315
直径 ø 5.1
ø 5.1/9 mm EL-5109
ø 5.1/11 mm EL-5111
ø 5.1/13 mm EL-5113
ø 5.1/15 mm EL-5115
直径 ø 6
ø 6/8 mm EL-6008
ø 6/10 mm EL-6010
ø 6/12 mm EL-6012
ø 6/14 mm EL-6014
直径 ø 7
ø 7/8 mm EL-7008
ø 7/10 mm EL-7010
ø 7/12 mm EL-7012
ø 7/14 mm EL-7014

短植体

高度 7mm
ø 4,3/7 mm EL-4307
ø 5,1/7 mm EL-5107
ø 6/7 mm EL-6007
ø 7/7 mm EL-7007

Video

EL Esthetic Line Implant - New Video

EL Esthetic Line Implant - New Video

C-Tech Implant - ND implant

MB - Implant

Purity and precision

Material purity and surface treatment

Material purity starts with the acquisition of raw material from only the most reliable sources of which each lot is accompanied by its own material certificate and is completely traceable at all phases of production and later use. The production facility in which all the implants and components are made is owned and operated by C-TECH and is certified to the highest standards governing the production of dental/medical devices. To maintain these standards, regular and independent audits are performed by the German auditor, TUV Süd. All up to date certificates are available for download on the company website.

The machining of the EL implant is an intricate process due to the precision required for the Morse conical connection and the exterior complexity of the implant. This intricacy requires double the machining time that would be necessary for that of an average implant. Throughout and following each step of the production process, the implants are thoroughly cleaned in 5 seperate cleaning stages, consisting of a total of 20 cleaning cycles. This attention to cleanliness is in order to assure that no risk of any production residue is remaining on the implant surface.

The surface topography is created through a patented acid etching process. The adjacent photos made with a scanning electron microscope (SEM) demonstrate the lack of impurities on the implant surface as well the abundant surface area created through the patented acidification process.

The purity of the grade 4 titanium used for the EL implant and the surface topology were independently verified through an investigation carried out with a scanning electron microscope (SEM) by the University of Cologne and Medical Material Research Center of Berlin, Germany. The investigation demonstrated the highest level of purity and cleanliness resulting in the award of the BDIZ quality seal. This investigation is avaliable in its long form on the C-TECH website.

Precision components

The successful achievement of a Morse lock and cold weld seal in the implant-prosthetic connection depends on high precision machining. A perfect Morse connection will result in a structural integrity and strength that will be as if the 2 parts were fused together and thus will practically eliminate the gap between the implant and the abutment. Accordingly, the C-TECH components are machined to a tolerance of within 10 microns.

This mechanical fusion of the prosthetic part and the implant has 2 important benefits; prevention of the bacterial colonization of the gap, which can lead to bone loss around the implant, as well as the elimination of micro-movements between the implant and abutment and the consequent screw loosening which can lead to prosthetic failure. The SEM photos on the right show different magnifications of the tight abutment and implant connection. The final photo at the bottom, at 1000 X magnification, shows a fine line where the abutment and the implant meet. This practically nonexistent gap is less than the 1,5 microns width of the bacteria to be found in the oral cavity.

Request information

我声明我已阅读隐私声明并同意数据处理 - 阅读 PRIVACY POLICY

Prefooter CN