EL-Esthetic Line,dental implants,dentures
EL-Esthetic Line,dental implants,dentures

  • Accordion EL TR

    EL / Esthetic Line

    EL-Esthetic Line,dental implants,denturesEstetik Seri implantları, implantların EL serisine cerrahi ve protez uyumluluğu sağlayan konik şekilli implantlardır. EL implantın özü, EL implantı ile aynı olup, yumuşak kemiğe aynı yerleşim protokolünü takip etmektedir. EL implantı , bilhassa yumuşak kemiklerde olağanüstü istikrar sağlayan geniş üç tasarımına sahiptir.

    • Daha fazla oku »

      EL implantın protez bağlantısı EL ile aynıdır; bir Morse konik kilit bağlantısı, mesnet gevşemesi, mikro hareketler ve implant bağlantısında boşluk yaratabilecek sair durumlara karşı ilave güvenlik sağlamaktadır.

      EL implant sisteminin İçbükey Estetik Kavram Diş protezleri, doku şekillendirme imkanı ve geniş seçenek gamı sunmaktadır. Geniş protez özgürlüğüne rağmen sistem, protez bağlantısı tüm implant çapları için aynı olduğundan, karmaşık olmayıp kullanımı kolaydır.

    ND / Narrow Diameter Implant

    ND Line,dental implants,denturesDar Çaplı diş implantı, sadece 3 mm’lik platform çapı olan, iki parçalı ince gövdeli bir implanttır. Bu implant, ön bölgedeki sınırlı ve dar kret alanları için idealdir. Tepedeki daha sivri dişler ile sonlanan implant yüzeyindeki bol sayıdaki diş, uygulama kolaylığı ve denge sağlamaktadır.

    • Descubre más »

      Bu diş implantının sınırlı boyutları ile kombine edilmiş basitleştirilmiş cerrahi protokol, aksi taktirde kemik takviyesi ve daha yüksek tedavi maliyetleri gerektirecek olan diş implantı vak’alarının çözüme kavuşturulmasını kolaylaştırmaktadır.

    GL / Livello Gengivale

    GL Line,dental implants,denturesDiş Eti Seviyesi implantı, dahili altıgen bağlantısı bulunan, konik şekle sahip bir diş implantıdır. İmplant, kortikal koruma için mikro yivli köprü ile donatılmış ve yumuşak dokuların yerleşimi için parlatılmış çıkıntı ile tamamlanmıştır.

    • Descubre más »

      İmplantın içinde bulunan altıgen dışbükey platform, içbükey platforma sahip GL mesnetlerine bağlandığında ideal tutuş sağlamaktadır. Farklı çaplarına rağmen GL serisi implantıların platform ebatları aynı olup, basitleştirilmiş protez protokolüne imkan tanımaktadır.

    • 1Convex platform

      The convex implant platform, in conjunction with the concavity of the implant’s base form a “suction cup” fit, once the abutment is tightened into final seating.

    • 2Polished gingival collar

      Extending down for one millimeter down from the top of the implant platform, the polished surface is ideal for accommodating the gingival tissue.

    • 3Micro-threading

      The micro threads increase functional surfaces, adapting them to the compact cortical bone tissue and safeguard it against aggression from larger threads to be found in conventional implants. The micro-threads are essential to the maintenance of cortical bone height around the implant.

    • 4Single internal hex connection

      The complete GL family is endowed with a single connection. Independent of the implant diameter, one abutment fits all. Thus reducing system complexity and cost.

    • 5Double helix threading

      The double-helix design sets c-tech Implants apart from the single helix implants by giving them a more symmetrical introduction into the bone. This translates into masticatory load balance which drastically reduces stress. Its symmetry also renders the implant self-centering, eliminating any form of misalignment in terms of the main axis of the osteotomy site. The pitch of the threads allows for an insertion time that is reduced by half.

    • 6Rounded apex

      Protection of the sinus floor, nerve canal and other important anatomical structures during insertion

    • Passivated surface

      The implant surface is blasted with aluminum oxide and then subjected to progressive etching using citric acid.
      This surface treatment accelerates the osseointegration process by providing a greater and more uniform area of contact between bone and implant while favoring an immediate implant load. The treatment provides for a uniform surface with progressive trabeculation to be achieved. An additional advantage of the citric acid treatment is that it leaves no traces following decontamination, further reducing the risk of implant failure.

    MB / Monoblock

    MB Line,dental implants,denturesMono Block, 3 mm çapında tek parçalı bir implanttır. Sistem 2 ayrı protez seçeneği sunmaktadır; komple sökülebilir protez için O-küreli başlık ve taş ile köprü uygulamalarına yönelik konik mesnet.

    • Descubre más »

      Alt ve üst çenede rastlanan farklı yumuşak doku ve kemik uygulamalarını daha iyi karşılayabilmek amacı ile sistem, 2 ana gövde profili ile donatılmıştır.

    • 1Prosthetic Options

      Choice between square or O-ball head depending on fixed or removable applications.

    • 2Support for Fixed Recontructions

      A tapered head with a 4,8mm height above the 3,1mm platform offers and optimal base and structure for the fixed reconstruction.

    • 3Gingival Collar

      MAN-OB/MAN-TAP smooth collar provides the platform switching height to accommodate the average mandibular gingival tissue.

    • 4Mandibular Cortical Maintenance

      Augmented MAN-OB/MAN-TAP micro grooving for the increased cortical height of the mandibular bone.

    • 5Low Profile Threading

      Low profile threading offers surface area yet with the reduced resistance necessary for placement in the D1/D2 bone that can be encountered in the mandible.

    • 6Surface Topography

      Blasted and acid etched main body surface.

    • 7Mandibular Apex

      Sharp apex to facilitate advancement in D1/D2 bone.

    • 8Augmented Gingival Collar

      MAX-OB/MAX-TAP smooth collar platform switching fits the thicker maxillary gingival tissue

    • 9Maxilla Type Bone Micro Grooving

      MAX-OB/MAX-TAP micro grooving accommodates the thinner cortical bone that is encountered in the maxilla.

    • 10Aggressive Main Body Threading

      MAX-OB/MAX-TAP main body threading, agressive reverse buttress threads deliver the surface area and stability required by softer maxillary bone

    • 11Maxilla Type Apex

      Rounded tip is ideal for the maxilla so as to prevent the possible perforation of the sinus.

    • System Compatiblity

      Choice of tapered and O-ball head prosthetics.
      O-ball head is compatible with SD, GL, BL and EL O-ball attachments

    SD / Small Diameter Implants

    SD Line,dental implants,denturesDar Çaplı diş implantları sistemi, çapları 1.8 mm, 2.1 mm, 2.4 mm ve 2.5 mm arasında değişen tek parçalı implant serisidir. Agresif dişlerin, ince dişlerin, halka ya da değil, O-küreli başlık ve kare başlık için beher çap seçeneği, piyasada bulunabilen en geniş mini diş implant aralığını sunmaktadır.

    • Descubre más »

      Bu sistem, takma dişlerin sabitlenmesi, kısıtlı alan ve kemik hacimleri ile tedavi maliyeti sınırlamaları sorunlarına çözüm arayan hekimler için idealdir.

    • 1Prosthetic choice

      Choice between square or o-ball head depending on fixed or removable applications.

    • 2Micro grooving

      The lower aspect of the implant collar is endowed with micro grooves to help maintain cortical bone.

    • 3Fine threading

      The fine thread SD implants are designed to facilitate the placement in hard bone.

    • 4Passivated surface

      The implant surface is blasted with aluminum oxide and then subjected to progressive etching using citric acid. This surface treatment accelerates the osteointegration process by providing a greater and more uniform area of contact between bone and implant while favoring an immediate implant load.

    • 5Smooth collar

      The top aspect of every collared implant is smooth so as to better accommodate soft tissue.

    • 6Aggressive threading

      The aggressive thread for SD Implants are designed for the added compression and surface area required in soft bone placement.

    • 7Collared and non-collared models

      C-tech provides SD models with and without gingival collars, allowing the practitioner to better address cases with differing gingival thicknesses.

    • Implant body

      The anatomically shaped implants are produced from medical grade 5 titanium.

Diş Implantları

Çap ø 3.8
ø 3.8/8 mm EL-3508
ø 3.8/9 mm EL-3509
ø 3.8/11 mm EL-3511
ø 3.8/13 mm EL-3513
ø 3.8/15 mm EL-3515
Çap ø 4.3
ø 4.3/9 mm EL-4309
ø 4.3/11 mm EL-4311
ø 4.3/13 mm EL-4313
ø 4.3/15 mm EL-4315
Çap ø 5.1
ø 5.1/9 mm EL-5109
ø 5.1/11 mm EL-5111
ø 5.1/13 mm EL-5113
ø 5.1/15 mm EL-5115
Çap ø 6
ø 6/8 mm EL-6008
ø 6/10 mm EL-6010
ø 6/12 mm EL-6012
ø 6/14 mm EL-6014
Çap ø 7
ø 7/8 mm EL-7008
ø 7/10 mm EL-7010
ø 7/12 mm EL-7012
ø 7/14 mm EL-7014

EL Kısa Implant

Yükseklik 7mm
ø 4,3/7 mm EL-4307
ø 5,1/7 mm EL-5107
ø 6/7 mm EL-6007
ø 7/7 mm EL-7007

Video

EL Esthetic Line Implant - New Video

EL Esthetic Line Implant - New Video

C-Tech Implant - ND implant

MB - Implant

Purity and precision

Material purity and surface treatment

Material purity starts with the acquisition of raw material from only the most reliable sources of which each lot is accompanied by its own material certificate and is completely traceable at all phases of production and later use. The production facility in which all the implants and components are made is owned and operated by C-TECH and is certified to the highest standards governing the production of dental/medical devices. To maintain these standards, regular and independent audits are performed by the German auditor, TUV Süd. All up to date certificates are available for download on the company website.

The machining of the EL implant is an intricate process due to the precision required for the Morse conical connection and the exterior complexity of the implant. This intricacy requires double the machining time that would be necessary for that of an average implant. Throughout and following each step of the production process, the implants are thoroughly cleaned in 5 seperate cleaning stages, consisting of a total of 20 cleaning cycles. This attention to cleanliness is in order to assure that no risk of any production residue is remaining on the implant surface.

The surface topography is created through a patented acid etching process. The adjacent photos made with a scanning electron microscope (SEM) demonstrate the lack of impurities on the implant surface as well the abundant surface area created through the patented acidification process.

The purity of the grade 4 titanium used for the EL implant and the surface topology were independently verified through an investigation carried out with a scanning electron microscope (SEM) by the University of Cologne and Medical Material Research Center of Berlin, Germany. The investigation demonstrated the highest level of purity and cleanliness resulting in the award of the BDIZ quality seal. This investigation is avaliable in its long form on the C-TECH website.

Precision components

The successful achievement of a Morse lock and cold weld seal in the implant-prosthetic connection depends on high precision machining. A perfect Morse connection will result in a structural integrity and strength that will be as if the 2 parts were fused together and thus will practically eliminate the gap between the implant and the abutment. Accordingly, the C-TECH components are machined to a tolerance of within 10 microns.

This mechanical fusion of the prosthetic part and the implant has 2 important benefits; prevention of the bacterial colonization of the gap, which can lead to bone loss around the implant, as well as the elimination of micro-movements between the implant and abutment and the consequent screw loosening which can lead to prosthetic failure. The SEM photos on the right show different magnifications of the tight abutment and implant connection. The final photo at the bottom, at 1000 X magnification, shows a fine line where the abutment and the implant meet. This practically nonexistent gap is less than the 1,5 microns width of the bacteria to be found in the oral cavity.

Bilgi isteme

Gizlilik bildirimini okudum ve verilerin işlenmesini kabul ettim - Oku PRIVACY POLICY

Prefooter TUR